|  Serving Industry Since 1920
(800) 279-2450
Please, use the form below to request a quote for product or service, or ask for a solution to an issue.
 
Click to refresh image
Marathon Washdown Motors

ID

Marathon Electric Washdown Motor

Get A Price Quote

Description

PowerWash™ XT Washdown Duty, Single Phase

White Epoxy, Totally Enclosed
Features:
• Encapsulated electronic starting switch is impervious to moisture
• Capacitor start induction run design for high starting torque unless otherwise noted
• Class F insulation
• 1.15 Service Factor
• Double sealed ball bearings
• 303 Stainless steel shaft with spring loaded contact seals in each endshield
• Stainless steel conduit box cover, nameplate, fan guard (TEFC) and hardware

• Cast oversized conduit box with high temperature Nitrile gaskets and
threaded entrance
• Plugged drain holes in each endshield for all angle mounting
• Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
• USDA-approved, white epoxy RUST-OLEUM® paint
• UL Recognized, CSA Certified and CE Mark
 
 
White Epoxy, Totally Enclosed
Features:
• 10:1 Variable torque, Constant torque speed range as listed below
• MAX GUARD® Class F insulation system
• 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
• Double sealed ball bearings
• 303 Stainless steel shaft with spring loaded contact seals in each endshield
(Drive end only on TENV motors)
• Stainless steel conduit box cover, nameplate, fan guard (TEFC only)
and hardware
• Cast oversized conduit box with high temperature nitrile gaskets and
threaded entrance
• Plugged drain holes in each endshield for all angle mounting
• Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
• USDA-approved, white epoxy RUST-OLEUM® paint
• UL Recognized, CSA Certified and CE Mark
 
 
All Stainless Steel, Totally Enclosed
Features:
• Suitable for use on VFD 10:1 Variable torque, 10:1 (TEFC) or
1000:1 (TENV) Constant Torque
• MAX GUARD® Class F insulation system
• 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
• Double sealed ball bearings
• 303 stainless steel shaft with spring loaded contact seals in each end.
(Drive end only on TENV)
• 300 Series Stainless steel external construction: frame, endshields, conduit
box, mounting base and hardware for superior corrosion resistance
• Internal corrosion resistant coatings on rotor and heavy polyester
varnish on the stator
• 100% Paint-free construction
• One way condensation drains in each endshield and conduit box for all angle mounting
• Nitrile Buna - N gaskets and seals on conduit box, through bolts and endshields
• Rated 60/50 hertz, 190/380 volt at next lower horsepower
• Nameplate information laser etched on frame
• UL Recognized, CSA Certified and CE Mark
 
 
Stainless/BISSC, Totally Enclosed
PowerWash™ Coupler Brakes
PowerWash™ coupler brakes are specifically designed for use with PowerWash™ Washdown Duty motors.
Rated for NEMA 4X/IP55, these brakes are suitable for applications with high moisture or pressure
washdown. Painted with a special white epoxy food-safe paint, these brakes are BISSC Certified.
Features:
• Suitable for use on VFD, 10:1 Variable torque, 10:1 (TEFC) or
1000:1 (TENV) Constant Torque, 1.0 Service Factor
• MAX GUARD® Class F insulation system
• 1.15 Service Factor on sinewave, 1.0 Service Factor on IBGT power
• Double sealed ball bearings with moisture resistant, high temperature grease
• 300 Series Stainless steel external construction: frame, endshields, shaft,
conduit box, mounting base and hardware for superior corrosion resistance
• Internal corrosion resistant coatings on rotor and heavy polyester varnish on the stator
• 100% Paint-free construction
• Viton® o-rings, shaft seals, and gaskets for superior sealing against chemicals
• Hydrophic breather in OP endshield and conduit box equalize air pressure
• Nameplate information laser etched on frame
• BISSC Certified for baking industry
• UL Recognized, CSA Certified and CE Mark